Excel substring: how to extract text from cell
The tutorial shows how to use the Substring functions in Excel to extract text from a cell, get a substring before or after a specified character, find cells containing part of a string, and more.
Before we start discussing different techniques to manipulate substrings in Excel, let's just take a moment to define the term so that we can begin on the same page. So, what is a substring? Simply, it's part of a text entry. For example, if you type something like "AA-111" in a cell, you'd call it an alphanumeric string, and any part of the string, say "AA", would be a substring.
Although there is no such thing as Substring function in Excel, there exist three Text functions (LEFT, RIGHT, and MID) to extract a substring of a given length. Also, there are FIND and SEARCH functions to get a substring before or after a specific character. And, there are a handful of other functions to perform more complex operations such as extracting numbers from a string, replacing one substring with another, looking up partial text match, etc. Below you will find formula examples to do all this and a lot more.
- Extract substring of a specified length
- Extract substring before or after a given character
- How to find substring in Excel (partial match)
- Extract text from cell with Ultimate Suite for Excel
- More Excel formulas for substring
How to extract substring of a certain length
Microsoft Excel provides three different functions to extract text of a specified length from a cell. Depending on where you want to start an extraction, use one of these formulas:
- LEFT function - to extract a substring from the left.
- RIGHT function - to extract text from the right.
- MID function - to extract a substring from the middle of a text string, starting at the point you specify.
As is the case with other formulas, Excel substring functions are best to learn from an example, so let's look at a few ones.
Extract substring from start of string (LEFT)
To extract text from the left of a string, you use the Excel LEFT function:
Where text is the address of the cell containing the source string, and num_chars is the number of characters you want to extract.
For example, to get the first 4 characters from the beginning of a text string, use this formula:
=LEFT(A2,4)
Get substring from end of string (RIGHT)
To get a substring from the right part of a text string, go with the Excel RIGHT function:
For instance, to get the last 4 characters from the end of a string, use this formula:
=RIGHT(A2,4)
Extract text from middle of string (MID)
If you are looking to extract a substring starting in the middle of a string, at the position you specify, then MID is the function you can rely on.
Compared to the other two Text functions, MID has a slightly different syntax:
Aside from text (the original text string) and num_chars (the number of characters to extract), you also indicate start_num (the starting point).
In our sample data set, to get three characters from the middle of a string beginning with the 6th character, you use the following formula:
=MID(A2,6,3)
=VALUE(MID(A2,6,3))Extract substring before or after a given character
As shown in the above examples, the Left, Right and Mid functions cope nicely with uniform strings. When you are dealing with text strings of variable length, more complex manipulations shall be needed.
How to extract text before a specific character
To get a substring preceding a given character, two things are to be done: first, you determine the position of the character of interest, and then you pull all characters before it. More precisely, you use the SEARCH function to find the position of the character, and subtract 1 from the result, because you don't want to include the character itself in the output. And then, you send the returned number directly to the num_chars argument of the LEFT function:
For example, to extract a substring before the hyphen character (-) from cell A2, use this formula:
=LEFT(A2, SEARCH("-",A2)-1)
No matter how many characters your Excel string contains, the formula only extracts text before the first hyphen:
How to extract text after character
To get text following a specific character, you use slightly different approach: get the position of the character with either SEARCH or FIND, subtract that number from the total string length returned by the LEN function, and extract that many characters from the end of the string.
In our example, we'd use the following formula to extract a substring after the first hyphen:
=RIGHT(A2,LEN(A2)-SEARCH("-",A2))
How to extract text between two instances of a character
To get a substring between two occurrences of a certain character, use the following generic formula:
The first two arguments of this MID formula are crystal clear:
Text is the cell containing the original text string.
Start_num (starting point) - a simple SEARCH formula returns the position of the desired character, to which you add 1 because you want to start extraction with the next character.
Num_chars (number of chars to extract) is the trickiest part:
- First, you work out the position of the second occurrence of the character by nesting one Search function within another.
- After that, you subtract the position of the 1st occurrence from the position of the 2nd occurrence, and subtract 1 from the result since you don't want to include the delimiter character in the resulting substring.
For example, to extract text surrounded by two hyphens, you'd use this formula:
=MID(A2, SEARCH("-",A2) + 1, SEARCH("-",A2,SEARCH("-",A2)+1) - SEARCH("-",A2) - 1)
The screenshot below shows the result:
If you are looking to extract text between 2nd and 3rd or 3nd and 4th occurrences of the same character, you can use a more compact SEARCH SUBSTITUTE combination to get the character's position, as explained in How to find Nth occurrence of a character in a string:
In our case, we could extract a substring between the 2nd and 3rd hyphens with the following formula:
=MID(A2, FIND(CHAR(1),SUBSTITUTE(A2,"-",CHAR(1),2))+1, FIND(CHAR(1),SUBSTITUTE(A2,"-",CHAR(1),3)) - FIND(CHAR(1),SUBSTITUTE(A2,"-",CHAR(1),2))-1)
How to find substring in Excel
In situations when you don't want to extract a substring and only want to find cells containing it, you use the SEARCH or FIND function as shown in the above examples, but perform the search within the ISNUMBER function. If a cell contains the substring, the Search function returns the position of the first character, and as long as ISNUMBER gets any number, it returns TRUE. If the substring is not found, the search results in an error, forcing ISNUMBER to return FALSE.
Supposing, you have a list of British postcodes in column A and you want to find those that contain the substring "1ZZ". To have it done, use this formula:
=ISNUMBER(SEARCH("1zz", A2))
The results will look something similar to this:
If you'd like return your own message instead of the logical values of TRUE and FALSE, nest the above formula into the IF function:
=IF(ISNUMBER(SEARCH("1zz", A2)), "Yes", "")
If a cell contains the substring, the formula returns "Yes", an empty string ("") otherwise:
As you may remember, the Excel SEARCH function is case-insensitive, so you use it when the character case does not matter. To get your formula to distinguish the uppercase and lowercase characters, opt for the case-sensitive FIND function.
For more information on how to find text and numbers in Excel, please see If cell contains formula examples.
To have a closer look at the formulas discussed in this tutorial, you are welcome to download our sample Excel Substring Functions workbook.
How to extract text from cell with Ultimate Suite for Excel
As you have just seen, Microsoft Excel provides an array of different functions to work with text strings. In case you are unsure which function is best suited for your needs, commit the job to our Ultimate Suite for Excel. With these tools in your Excel's arsenal, you just go to Ablebits Data tab > Text group, and click Extract:
Now, you select the source cells, and whatever complex strings they contain, a substring extraction boils down to these two simple actions:
- Specify how many characters you want to get from the start, end or middle of the string; or choose to extract all text before or after a given character.
- Click Insert Results. Done!
For example, to pull the domain names from the list of email addresses, you select the All after text radio button and type @ in the box next to it. To extract the user names, you select the All before text radio button, as shown in the screenshot below.
And you will get the following results in a moment:
Apart from speed and simplicity, the Extract Text tool has extra value - it will help you learn Excel formulas in general and substring functions in particular. How? By selecting the Insert as formula checkbox at the bottom of the pane, you ensure that the results are output as formulas, not values.
In this example, if you select cells B2 and C2, you will see the following formulas, respectively:
- To extract username:
=IFERROR(LEFT(A2,SEARCH("@",A2)-1),"") - To extract domain:
=IFERROR(RIGHT(A2, LEN(A2)- SEARCH("@",A2) - LEN("@") + 1),"")
How much time would it take you to figure out these formulas on your own? ;)
Since the results are formulas, the extracted substrings will update automatically as soon as any changes are made to the original strings. When new entries are added to your data set, you can copy the formulas to other cells as usual, without having to run the Extract Text tool anew.
If you are curious to try this as well as many other useful features included with Ultimate Suite for Excel, you are welcome to download 15-day trial version. And if you like the tools and decide to get a license, be sure to grab the 15% off coupon code that we provide exclusively to our blog readers: AB14-BlogSpo.
More formulas for substrings in Excel
In this tutorial, we have demonstrated some classic Excel formulas to extract text from string. As you understand, there can be almost infinite variations of these basic scenarios. Below you will find a few more formula examples where the Text functions come in handy.
- How to extract number from string in Excel - formula examples to get a number from various text strings.
- How to extract Nth word from a text string - how to use MID in combination with 4 other functions to get any Nth word from a cell.
- How to extract a word containing a certain substring - one more non-trivial MID formula that pulls a word containing a specific character(s) from anywhere in the source string.
- How to extract text between parentheses - using this approach, you can get a substring between any two characters you specify.
- How to Lookup partial string match - how to use an Excel substring function (LEFT, RIGHT or MID) in combination with Vlookup to retrieve values based on partial match.
- How to replace one substring with another - a formula to find and replace a certain character or substring within the text string.
- How to count cells containing a substring - how to use the COUNTIF function with wildcard characters to count cells containing specific text, i.e. count with partial match.
68 Responses to "Excel substring: how to extract text from cell"
Steven says:
Nice primer, however, extracting a number from a string leaves me with another string. When I convert these strings to numbers via format I can't operate on them as numbers, they are still strings?
Hi Steven,
Right, whenever you use a Text function (Right, Left, Mid) to extract something, the output is always text. In case of extracting a number from a string, the result is a numeric substring, which in terms of Excel is also text, not number. To convert it to number, you can wrap your formula in the VALUE function. Here's an example in the simplest form:
=VALUE(LEFT(A2,4))
And thank you for a smart question! I've added this tip to the article.
Prasanna says:
Or else you can multiply it by 1, with iferror.
Hank says:
When I download weekly the raw date to an excel spreadsheet I was looking for a way to extract the name from the name-and-initials/initials-and-number from the raw data. Your tip (Left(cell, Search("char",cell)-1) is excellent. Below are some fictitious names:
Hofman, Todd (th81)
Medemblik, Terry (tjm)
Williams, Mark (mrw)
Vanderzwaag, Ron (rvz)
Linde, Tim (tl1074)
Nijenhuis, Andy (andy)
Verhey, Tim (tmv)
Moesker, James (jm1181)
Martin, Nevin (nwm)
Swaving, Brad (bs776)Julia Leibbrand says:
"Prescriber: Mitchell CNM H Becky
Patient: Patient Name
Medication: FE TABS 325 (65 FE) MG ORAL TABLET DELAYED RELEASE; Qty: 60 Refills: PRN
Ordered: 29-Dec-2017@1130
Signed/Transmitted: 29-Dec-17@1130
Pharmacy: Access Family Care Pharmacy*
530 South Maiden Lane
Joplin, MO
Ph: 4177827209
Fax: 4177827727"Above is a text field in an excel spreadsheet. I need to make the medication in a field by itself.
Can you tell me how to pull what is after Medication:?
Francisco Aguilar says:
FE TABS 325 (65 FE) MG ORAL TABLET DELAYED RELEASE; Qty: 60 Refills: PRN
I will assume all the strings are in the format "Medication; Qty"
1) To extract the medication, or what's before the semicolon, use:
=LEFT(String, SEARCH(";",String)-1)
2) To extract the Qty (and what's after), use:
=RIGHT(String,LEN(String)-SEARCH(";",String))Basile Ruau says:
I'm sure there may be a more efficient way but you can do the following:
=MID(A1, SEARCH("Medication: ", A1) + 12,SEARCH(";", A1, SEARCH("Medication: ", A1)) - (SEARCH("Medication: ", A1)+12))
Assuming your text is in A1.
RK says:
The search function you describe does not work at all.
Hello,
All the formulas discussed in this tutorial are available for download in this sample workbook, so you can make sure they all work as described.
Vic says:
Challenge: I need to extract a string between two other strings (a word and a character) within a cell, but those other strings may repeat inside the cell.
For example - a scanning tool conducts 10 tests and returns a failure for one but includes all the Passes in the output. The test results are separated within each cell with *****
multi-line cell example:
Test: Endpoint
Result: Pass
Details: Endpoint Connected
*****
Test: Resolution
Result: Fail
Details: Unable to resolve FQDN
*****
Test: Port
Result: Fail
Details: Port 1234 does not respondFirst thought was re-organize the output using text to columns butfor whatever reason it doesn't work (even after replacing the ***** with a single char like ^ (I'm guessing it's thrown off by the carriage returns within the cell).
So we're left with searching for some combination of Mid, Len, Search/Find but it's proving extremely difficult. It's easy to find the first instance of "Failed", but hard to then find the stopping point which has to be the very next ^ char after "Failed", while also then being able to repeat the extraction for any other Failed tests inside the cell.
Jeff says:
Vic, do you still need a solution for this? Also curious to know what tool you use for getting the port data and how you get it into excel. Some functions/searches can be done as part of the import procedure that are much harder to do afterward. cheers
pratik says:
How to get first name from below name list
aakash kumar, Arvind soni, Tejas Sawant
I want to extract first name "Aaskash kumar"? How to do this? Kindly help me?
Ankur says:
=LEFT(D11, SEARCH(",",D11)-1)
Cell D11 will have : aakash kumar, Arvind soni, Tejas Sawant
Abraham says:
Hi,
wanting to understand how to implement Case statement in Excel 2010. I have more than 20 conditions to match and if else is not helping me out. also I have researched in the internet they have asked me to make use of Choose function witch do not work either. could you please help how I can overcome the problem. here is some sample code that I have come up with to resolve my issue.
=CHOOSE(
(
( 2 * COUNT(FIND("ID",AR2))>0) +
( 4 * COUNT(FIND("CD",AR2))>0) +
( 8 * COUNT(FIND("DTE",AR2))>0) +
( 16 * COUNT(FIND("PH",AR2))>0) +
( 32 * COUNT(FIND("AMT",AR2))>0) +
( 64 * COUNT(FIND("PER",AR2))>0) +
( 128 * COUNT(FIND("TOT",AR2))>0) +
( 256 * COUNT(FIND("NME",AR2))>0) +
( 512 * COUNT(FIND("NUM ",AR2))>0) +
( 1024 * COUNT(FIND("DESC",AR2))>0) +
( 2048 * COUNT(FIND("TYPE",AR2))>0) +
( 4096 * COUNT(FIND("ADDR",AR2))>0) +
( 8192 * COUNT(FIND("EMAIL",AR2))>0) +
( 16384 * COUNT(FIND("RATE",AR2))>0) +
( 32768 * COUNT(FIND("PCT",AR2))>0) +
( 65536 * COUNT(FIND("NOTE",AR2))>0) +
( 131072 * COUNT(FIND("ZIP",AR2))>0) +
( 262144 * COUNT(FIND("STE",AR2))>0) +
( 524288 * COUNT(FIND("TITLE",AR2))>0) +
( 1048576 * COUNT(FIND("SUM",AR2))>0)
),
"I_",
"C_",
"D_",
"T_",
"A_",
"P_",
"A_",
"T_",
"I_",
"T_",
"C_",
"T_",
"T_",
"P_",
"P_",
"T_",
"T_",
"T_",
"T_",
"Q_"
)Matt says:
I have a string (05/21/201806:59:0511.311.311.711.3) and wanting to break the data up. I know I can do Left(), Mid() and Right() to get what I want. But what I am trying to find a way to copy/paste without the formula in the final cell. I will need to be able to copy the separated data into another spreadsheet. Is there a way to paste into another cell without the formula in it?
Doug says:
Matt:
If I understand your question correctly I would say you can right click choose Paste Special, then choose the Value button. No formulas, only values.
Paul says:
Thanks - I tested out the functions and learned something new. I can extract the JPN or GB from "Chatoyancy(JPN)" or Morgan's Mambo(GB) - BUT I really need to separate the text so I am left with "Chatoyancy" and "JPN", or "Morgan's Mambo" and "GB".
Regarding my previous post - I'm trying Text to Columns - awkward, but I think I got it.
Bode says:
SCPA-2F1ASO-PAC01-JB01-PA-100 How can i extract data between the 2nd and third hyphens to different cell and also the third and fourth unyo a differnt cell.
Many thanks
Bode:
You can use the Text-to-Columns tool. It's under the Data tab. Just enter"-" as the delimiter.
Or you can enter this into an empty cell and copy it across as many columns as needed. My test data was in A1, so you might want to change that address.
You can also copy it down as many rows as needed.
=TRIM(MID(SUBSTITUTE($A1,"-",REPT(" ",100)),(COLUMNS($A$1:A$1)-COLUMN($A$1))*100+1+SUMPRODUCT(LEN($A1:A1))-LEN($A1),100))
julia says:
hi
how can i change format 243F160918D1 to {24, 3f, 16, 09, 18, d1}?Julia:
Not sure how to format a cell to display the number in the manner you want, but here's a formula to add a comma after every other character.
Where the original text is in A83:
=LEFT(A83,2)&","&MID(A83,3,2)&","&MID(A83,5,2)&","&MID(A83,7,2)&","&MID(A83,9,2)&","&MID(A83,11,2)
As you can see we start at the left of the text in A83 return the first two characters and then concatenate a comma. Then we use the MID function to concatenate the text in A83 beginning with the third character and return the next two characters and concatenate a comma.
Continue with this same process until all characters have been added to the new string which contains a comma after every other character except the last one.
You can change the cell addresses, the number of characters to skip and/or return and the inserted character to suit your needs.
Sid says:
Hi,
I have a sheet with a list of docs (>500k), with their respective path. I want to extract the folder name from the path. Since, it has folders and sub-folders, the folder name doesnt come at the same position. The path is reported as "E:\abc\defg\...\xyz\". Basically, I'm looking to extract the text between the last two "\" i.e. "xyz".
Thanks in advanceSid:
Is it always the case that the information you want is in between the last two forward slashes?
Abdul Musawwir says:
how can i seperate out cheque no in a seperate cell plz quide me. the data in cel is:
Cell data
Cash Withdrawal # 58989,CHQ
00060706,AHSAN JADOON
4240113035499 CHQ 00060706 DHA SHAHBAZ BRANCH,4240113035499Abdul:
If the data is in H37 as one long string, enter this in an empty cell.
=MID(H37,SEARCH("CHQ",H37)+4,8)
It says, in H37 find the first "CHQ" go forward 4 characters which includes the "CHQ" and a space and return the next 8 characters.Emmylou says:
Hi, how do I remove a decimal point for a number 04.80 to be converted to 0480?
Thanks for your help.Abdullahi Sule says:
Hi Emmylou,
How are you doing, i think you can use substitute function as =SUBSTITUTE(YourCell,".","".
Thank you.
Naomi says:
I get reports where the name format isn't consistent -- some are FirstName LastName and others are LastName, FirstName.
Can I use an IF statement combined with your extract formulas to create a single formula that extracts LastName from either format?
Like this: IF(entry contains comma, LEFT formula, RIGHT formula)
Would that work?
And thanks for the great examples and explanations!
Hi Naomi,
This idea has never occurred to me, but I suppose yes, it will work.
Here's the formula to extract the last name:
=IF(ISNUMBER(SEARCH(",",A1)), LEFT(A1, SEARCH(",", A1)-1), RIGHT(A1,LEN(A1)-SEARCH(" ",A1,1)))If you'd like to get the first name too, you can find the appropriate LEFT and RIGHT formulas in this tutorial: How to split names in Excel.
Many thanks! The last name extract worked beautifully -- I'll try the first name next.
Doug also sent me information -- I really appreciate everyone's help.
Sumesh Kurichiveettil says:
i have a string in one cell with length of 400 characters ( A1) . Is there a way i can extract first 150 characters in ( B1) one cell, next 150 in (C1)2nd cell and balance in 3rd (D1)
Thanks
Sumesh
Sumesh:
The answer to your question is easy. My only question is why are there 400 characters in one cell?In B1 =LEFT(A1,150)
In C1 =MID(A1,151,150)
in D1 =RIGHT(A1,100)
Saura Tripathy says:
Hi,
Need some help with extracting data from cell with multiple lines. For example below data is in a single cell. This is a report generated against multiple software with found version and existing version. There are thousands of cell with similar data with "Found: xxxxx". I would like to know a way to get ONLY "Found: xxxxx" data into another column. Would that be possible?
--------------------------------
Tested: C:\Windows\Microsoft.NET\Framework\v4.0.30319\mscorlib.dllFound: 4.7.3130.0
Context:
Fix: Install the appropriate patch from Microsoft or through Windows Update.
--------------------------------Subbarao says:
I have a data format like this "QA_CASE_1234_John_Smith" How do I extract John Smith in a separate cell without any underscore in John Smith name.
Andrew says:
If I have this string:
Babababa{njnj}v_ANDREWGORT@andrew@gort.com
How do I extract the 'ANDREW' alone?
This is what I have:
=MID(C2,SEARCH("v_",C2)+2,SEARCH("GORT",C2, SEARCH("v_",C2)+2) - SEARCH("GORT",C2)-1)
It appears that "GORT" doesn't work. Is there any way to do this?
Ashish Thapa says:
I want to extract last 2 word before and after "-" in one formula
eg.
Abc-ccc-ddd, here I need ccc-dddFff-hhh-kkk-yyy, here I need kkk-yyy
Kkkk-hhh, here I need kkkk-hhh
Marcus Gallagher says:
Hello i'm trying to extract dimension from an item name column
E.g. item names are all in a column and one would be "White fence post 80x80 1.8M" but another might be "RT1 35x150 treated decking 4.8MT"
In these cases how do i pull out just those numbers?
Joanne says:
I am trying extract only the GB information from a cell in Excel. However in my report, there is an unknown number of times that the GB information will appear and I have at least 2000 lines to go through.
A cell could look like this:
0 GB (0% or 1.0:1), 9 GB (31% or 1.5:1)
or like this:
453 GB (29% or 1.4:1), 728.25 GB (33% or 1.5:1), 422.25 GB (33% or 1.5:1), 923.5 GB (42% or 1.7:1), 705.5 GB (33% or 1.5:1)I want to extract each occurrence of the GB amount (i.e. 0 GB, 9 GB from the first example above and 453 GB, 728.25 GB, 422.25 GB, 923.5 GB, 705.25 GB from the 2nd example above)
The ultimate goal is to be able to add the GB amounts together for each cell and get a total. I tried splitting the text, but because some of the cells have so many occurrences of GB's it didn't seem like a good choice.
Does anyone have any ideas?
Thank you in advance,
JoanneVishal says:
i want to extract name NEW SAHARA BEEJ BHANDAR-TIJARA from NEW SAHARA BEEJ BHANDAR-TIJARA-F C ABS (if sentence containing ABS) with the help of if condition.
Vishal,
Assuming your data is in A1, the following formula will help:
=LEFT(A1,FIND("-",A1,FIND("-",A1)+1)-1)Thanks.formula works.And i have one more problem.If two cell of consecutive rows contain names.One cell having e.g name NEW RAJ BEEJ BHANDAR-NASIK-F C ABS & other cell having name NEW RAJ BEEJ BHANDAR-NASIK.Here i want to extract name NEW RAJ BEEJ BHANDAR from first cell if it contain ABS and otherwise it will remains the same if it doesn't contain ABS
Vishal,
for your second task, please try this one:
=IFERROR(IF(SEARCH("*ABS*",A1)>0,LEFT(A1, SEARCH("-",A1)-1),A1),A1)Here are the articles for you to learn how these functions work:
IF function
SEARCH functionMy problem is suppose if two consecutive rows contain names e.g 1st cell does contain name NEW RAJ BEEJ BHANDAR-NASIK-F C ABS and in 2 nd cell doescontain name NEW RAJ BEEJ BHANDAR-NASIK.Now i want to extract only the name NEW RAJ BEEJ BHANDAR-NASIK from name NEW RAJ BEEJ BHANDAR-NASIK-F C ABS (when cell contains ABS). Otherwise the name must remains the same as NEW RAJ BEEJ BHANDAR-NASIK (when it doesn't contain ABS)
sandeep kelakr says:
i need help to identify in single cell with colour as we have three different things
5 Pkt -Tata Rallis Fungicide Captaf (Size=500 gm)- 309 -
1 Unit PGR Induce G 500 ml Rs. 515
1 Unit Humic Acid Roota 1 kg Rs. 850"Erin says:
I am trying to extract all letter characters (to the right) following the numbers in the middle of each text line. For example, the first line, I would only need "BLUE CROSS BLU"
ACH DEPOSIT BCBS INC 462275727 101000011824415 BLUE CROSS BLU
ACH DEPOSIT HCCLAIMPMT 1932440070 031100200512323 AETNA A04
ACH DEPOSIT HCCLAIMPMT 1932440070 031100204517462 WPSAny ideas on how I could do this?
Thanks!Rahul says:
Hi I'm Rahul Actually I'm new Learner Excel Can You Help Me in Excel
RFoley says:
I need to extract the first 3 numbers, between the 2nd and 3rd dash. The number of characters between the dash can vary between 3 and 4.
I purchased the suite and have also used the above formulas and can't get it to work. It always extracts the complete string between the "-". I must have it extract only the 1st 3 characters between the dashes.P Jayachandra says:
Sir/madam,
If a cell contains variable numbers (0 to 6) if cell value is 1 instead of 1 it should display Sunday and so on. Please give me the solution in Microsoft excel.
Thanks.amin firnashl says:
The text string is "47 Nelson Street Kettering Northamptonshire NN16 8QN" in Cell A2.
Here I need the street(47 Nelson Street), Town(Kettering), county(Northamptonshire) and Code(NN16 8QN) in each separate cell of a row.
How to do this? Give me the formula for each retrieval.
Also, another string is "Ref. No: 19/00443/EPHMO Status: Current Licence Applicant Name: Mr Jack Oliver McLoughlin" in cell A3.
I need only the ref no (19/00443/EPHMO) and the name (Mr Jack Oliver McLoughlin) in separate cells.
Help me with these formulas.Brad Smith says:
I am using the formula: =SUMIF(Laurie!$A:A,B2,Laurie!$E:$E) to try and get names of people from a separate worksheet tab (tab is named Laurie). But the cells in column E on the Laurie tab are not numbers but someones name. So basically if I put a number in column E cells on the Laurie tab it will show up correctly in my current worksheet tab.
But any names or non-numbers in the column E cells show up as 0 in my main worksheet. I am guessing this is because I am using the SUM function so it is trying to sum up any number in each cell in column E.
Anyone help for which function would be best to get the name (or words) form those cells in that column would be great.
Thanks.Nancy M says:
Hello! I have the below and depending on the length of my I need to pull everything up until the second hyphen so:
PRO85-2700-270S would become PRO85-2700
SPRI87-4000-400S would become SPRI87-4000but then I have some strings with 3 hyphens and I only need to pull up to the 3 characters after the 2nd hyphen.
Example:
SLAE01-7000-330-7009-11 would become SLAE01-7000-330I have a file with 7K+ rows so any helps would be AMAZING and greatly appreciated!!
Thanks!
NancyKevin says:
Hi!
I need to extract following words in my cells, which dont have any specific character and at the same time the amount of 1st words are not same:
LOOMBNB
BNBUSDT
I should separate BNB from a 1st line and USDT from the 2nd one. as you see, I cannot use Text-To-Columns as well.
please help!
ThanksRisheesh says:
how can we pull numbers from any alphanumeric string using a formula.
Example-
asd123sd
123bhs23sd
sde234jh213Indunil says:
Dear
Thanks For your Gide to separate W1 from {W1_21} that is sheet name of EXCEL generate from command of {MID(CELL("filename",A29),FIND("]",CELL("filename",A29))+1,255}Ignacio says:
Hello!
Could you please help me to create a formula to obtain the information of the second and the third bracket:[Ignacio] Status changed from [one] to [Tweleve]
[Carlos] Status changed from [hundred] to [five]Thanks for you help!
Everything I read from Svetlana Cheusheva is always clear, straight forward and fill with examples. Damn I wish I knew more about MS Excel like her :o)
Thank you for your excellent postings
I want to extract 200 from "200 Euro", "Euro 200", "Euro-200", "200 Euro - 500 Euro",
all are in a column.Chris says:
Hello all, really need your help guys!
I have a series of columns, for example: Colummn with 3 digit numbers like 420, a column with a word and a number like "Nascar 2", and a column with just a word that says "Honda". I need to make a formula that would combine those 3 columns, but shorten them. So I would use the first number "420", the number from "Nascar 2" and the first letter from "Honda". The solution would be 420-2-H and I need to make a formula for that with the "-" sign in between. Help please!
mwmentor says:
Hey there:
I would contemplate a formula using a number of different methods:Step 1 is simple and that would just be: =(A1) (for example)
The second step requires extracting a number from the string and a good reference to achieve this can be found here: https://www.ablebits.com/office-addins-blog/2017/11/22/excel-extract-number-from-string/
The third and final step is simple: RIGHT(C1;1) (RIGHT(Cell-Ref;No's chars)Now that you have your formula sorted out, stitch them together using concatenate:
=Step-1&"-"&Step-2&"-"&Step-3
Replacing Step-1 through Step-3 with your formula. The = sign is used once at the beginning of the formula.Cheers... -M
Hi there:
I am struggling to understand something here. I have the following string "avro_67563908_289(000).csv" to which I apply the following formula: `=MID(A6;SEARCH("_";A6)+1;SEARCH("_";A6;SEARCH("(";A6)+1)-SEARCH("_";A6)-1), which results in a `#VALUE!` error. I have spent quite a bit of time trying to understand this, given that the following test formula works: `=MID(A6;SEARCH("_";A6)+1;SEARCH("(";A6)-SEARCH("_";A6)-1)` - it just starts from the first `_` and not the second which is what I want.
Is there anything obvious that I am doing wrong... the field format is `General`.Thanks.
-Mamy says:
Hello,
I need to know how to extract everything to the left of a string in a list where there is not the same number of characters on the left side or right side of the string in a column. For example, I need to extract everything to the left of " - Garage 1" and " - Store 2" and " - Building" So, I want to get: Supplies-Other, Repairs-Equip, Salaries-Staff. I'm sure this is pretty simple, but I can't figure it out. Thanks in advance for any help anyone can provide!Supplies-Other - Garage 1
Repairs-Equip - Store 2
Salaries-Staff - Building 3Ands says:
Hi, what should be the formula if I want to extract text from the cell but the result doesn't match the character that I am looking for? the best scenario is as below:
14933 - Cologne West
15116 - Tador East
12345 - Cologne East
45678 - Tador South
36789 - Sucat
15674 - AlabangFrom the list, I want to extract only the text but with a condition that if it is not "Tador", just copy the location, otherwise just put "Tador". I have tried several formulas but to no avail.
Hope you can help me out on this, many thanks in advance!
P G MEENAKSHI says:
I have a long text (which is a extraction of narration from accounting entries) which contains month and year like "salaries for the month of FEB 2018", "cheque number 123456 paid to Mr. Rajan towards salary for the month of Feb 2018". Now i want to extract the month and year alone. Can somebody help me.
Sayan says:
How to extract the texts between 3rd and 4th or in case (last - 1) texts between instances of a character
Orsolya says:
Hi, I have long texts in the excel cells and I would always need to extract only the Impacted country which differs from cell to cell (in the example below it would be India). Only the text before the country is constant "Impacted Country (For multiple countries select global) = "
Can anybody help how can I do that?
Text in 1 excel cell is for example as below:
---------------------- USER ENTERED DATA ----------------------
Operating System = Windows 10
Impacted Country (For multiple countries select global) = India
Idoc Number: = (NOT ENTERED)
GSAP Transaction Code: = (NOT ENTERED)
EMCS Table = (NOT ENTERED)
Document Number: e.g. BOL, Nom key, LRN# = (NOT ENTERED)
EMCS Dashboard Status = (NOT ENTERED)
Interface ID: = (NOT ENTERED)
Load date/Time = (NOT ENTERED)Thank you for your help in advance!
Ganesh says:
How do I cut the specific content from a cell?
Kushal Ashitkumar Parikh says:
i want to extract only LHS or RHS from the text, how to do it
i.e 1234 LHS WERT SERT
1234 RHS WERT SDFR
